Description
The AW566-LS is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2265H 380 mm (15 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 60° x 60° coverage. The loudspeaker system can used in either the vertical or horizontal orientation. This loudspeaker is EN 54-24 Compliant for life safety applications.
More Information
Key Features
- 60° x 60° coverage
- EN 54-24 compliant for life safety applications
- 15-inch JBL 2265H Differential Drive® LF driver
- JBL 2432H high-frequency compression driver
- Large PT™ Progressive Transition waveguide
- Weather-resistant all-fiberglass enclosure
- 400 W 70V/100V transformer included
- U-type mounting bracket included
- Available in Gray and Black finish
Technical Specification
- Frequency Range (-10 dB): 42 Hz – 20 kHz
- Frequency Response (±3 dB): 89 Hz – 18 kHz
- Coverage Pattern: 60° x 60°, rotatable waveguide
- Directivity Factor (Q): 15.8
- Directivity Index (DI): 12 dB
- Crossover Frequency: 1.1 kHz
- System Power Rating: 400 W / 1600 W peak, 100 hours
- Maximum SPL at 1m: 127 dB SPL continuous average / 133 dB peak
- Maximum SPL at 4m: 114.24 dB
- System Sensitivity: 100 dB SPL, 1W @ 1m
- Sensitivity: 89.6 dB SPL, 1W @ 4m
- Transformer Taps: 70V: 400 W, 200 W, 100 W; 100V: 400 W, 200 W
- LF Driver: 1 x JBL 2265H, 380 mm / 15 inch Differential Drive® driver with 75 mm / 3 inch dual voice coil
- Nominal Impedance: 8 ohms
- LF Sensitivity: 98 dB SPL, 1W @ 1m within operational band
- HF Driver: JBL 2432H, 38 mm / 1.5 inch exit compression driver with 75 mm / 3 inch voice coil
- HF Sensitivity: 113 dB SPL
- Waveguide: PT-H66HF-1
- Enclosure: Hand-laminated fiberglass, gray gelcoat similar to Pantone 420C; available in black version
- Suspension Attachment: 2 x M10 for included U-bracket, 2 x M6 for aiming stabilization, 1 x M10 rear safety point
- Grille: Three-layer grille assembly with 16-gauge powder-coated stainless steel, open-cell foam, and stainless steel mesh
- Input Connector: CE-compliant covered barrier strip terminals
- Wire Acceptance: Up to 5.2 sq mm / 10 AWG wire or maximum 9 mm / 0.375 inch spade lugs
- Environmental Rating: IP55C per IEC529
- Dimensions: 485 x 810 x 478 mm
- Dimensions in Inches: 19.1 x 31.9 x 18.8 inch
- Net Weight: 28.3 kg / 62.5 lb
